FST-T1200 Six Phase Relay protection tester (Copy)
Meet all on-site testing requirements. This instrument has standard six phase voltage and
six phase current output, which can be used to test various traditional relays and protection
devices, as well as various modern microcomputer protections, especially for transformer
differential power protection and backup automatic switching devices, making testing more
convenient and complete.
AC current source (6 * 30A)
Single phase current output (RMS) 0 – 30A / phase, accuracy: 0.2% ± 5mA
Six phase parallel output (RMS) 0-180A/six parallel outputs with the same
phase
Description
Section 2 technical parameters
- AC current source (3 * 30A)
| Single phase current output (RMS) | 0 — 30A / phase, accuracy: 0.2% ± 5mA |
| Three phase parallel output (RMS) | 0 – 90A / three phase in phase parallel output |
| Allowable working value of phase current for a long time (effective value) | 9.9A |
| Maximum output power per phase | 300VA
|
| Maximum output power of three phase parallel current | 800VA |
| Maximum output allowable working time of triple parallel current | 5s |
| frequency range | 0 — 1000Hz, accuracy 0.001Hz |
| Harmonic number | 2–20second |
| phase | 0–360The accuracy is 0.1 degree |
- 2. DC current source
| DC current output | 0–± 10A / phase, accuracy: 0.5% ± 5mA |
- 3. AC voltage source
| Single phase voltage output (RMS) | 0 — 120V / phase, accuracy: 0.2% ± 5mv |
| Line voltage output (RMS) | 0–240V |
| Phase voltage / line voltage output power | 75VA/100VA |
| frequency range | 0 — 1000Hz, accuracy: 0.001Hz |
| Harmonic number | 2–20second |
| phase | 0–360Degree, accuracy: 0.1 degree |
- 4. DC voltage source
| Single phasevoltage output amplitude | 0–± 160V, accuracy: 0.5% ± 5mv |
| Output amplitude of line voltage | 0–±320V |
| Phase voltage / line voltage output power | 90VA/180VA |
- 5. switching value terminal
| Switch input terminal | 8yes |
| Air contact | 1 — 20 mA, 24 V, internal active output of the device |
| Potential reversal | Passive contact: low resistance short circuit signal
Active contact: 0-250V DC |
| Switch output terminal | 4 pairs, empty contacts, interruption capacity: DC: 0-30V/5A,
AC:0-250V/5A |
- 6. others
| time frame | 1ms — 9999s, measuring accuracy: 1ms |
| Volume and weight of portable series single machine | Volume 335 x 168 x 270mm3, about 12.5kg |
| Power Supply | AC220V±20%，50/60Hz，10A |
| Working current＜10A | working hours≤60minute |
| 20A＞Working current≥10A | working hours≤70S |
| 30A＞Working current≥20A | working hours≤15S |
| Working current：30A | working hours≤5S |
Reviews
There are no reviews yet.