Applications: 
1. Road traffic 
2. Automotive anti-collision 
3. Construction survey and design 
4. Levelmaterial level detection 
5. Robot arm control 
6. Fixed length control of container crane spreader 
7. Security monitoring 
8. Military applications 

Features:

In outdoor sunlight, it can ensure to measure more than 50m and measurement accuracy in 1-5mm, if to measure long distance in outdoor or less reflective object indoor and require more than 50meters including ,suggest this type.

Note: if you need RS485 Bus, which can connect 250nos of laser distance sensor at the same time

1.Cable connecting definitions

Red Line------VCC 5VDC or 9-24VDC

Black Liine-----GND

White Line-----RX，

Green Line----TX;

Yellow Line------SGND；

Under the condition of bad measurement（for example if the ambient light is too strong. The point measured diffuse reflection coefficient is too big or too small, measurement accuracy has big error:±1 mm+40PPM）

Kindly Prompt: If need to DB9 Female head, so RX,TX and G will be corresponding to connection to Second, Third and Fifth base pin of DB9 head separately.

Demo Software:

Communication:

·    Uart: 9600bps, 8N1

·    Send command of “O”: turn on the laser

·    Send command of “C”: turn off the laser

·    Send command of “D”: measure distance and return the results

·    Send command of “S”: return the module temperature and supply voltage

Power Supply	5VDC or 9-24VDC
Measurement rage（no reflector	0.05-200m
Measurement Accuracy	+/-1mm
Resolutions	1mm
Measurement Rate:	10Hz
Laser Energy	≥10mj
Laser Life	＞20000h
Laser Grade	Ⅱ
Output Mode	RS232 ,RS485 Communication port; 4-20mA
Laser type	635nm,<1mw
Laser beam angle	＜1mrad
Spot Size	5mm（50M），10mm（100M），20mm（200M）
Dimensions	65×38×133mm
Weight	280g
Operation temperature	-20 C°～60 C°
Storage temperature	-25 C°～60 C°
Protect Grade	IP65

technical file